Ask Experts Questions for FREE Help !
Ask
    losixx4's Avatar
    losixx4 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2007, 10:16 PM
    Honeywell furnace
    I have a Honeywell forced air furnace and it just makes a clicking noise,the pilot comes on and it light on occasion the blows out. I had the master board recently replaced and it has a green blinking light> is this something I can fix? It about 4 years old
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 29, 2007, 04:44 AM
    How about a model number for the furnace and look for a name. Honeywell makes parts but to the best of my knowledge makes no forced air furnaces only little electric heaters.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Oct 29, 2007, 06:45 AM
    You should be able count the flashes to get a trouble code, flash, pause, flash, flash, pause is a 12. The trouble codes should be on a decal on th door of th furnace or somewhere. The sequence of operations will help too at https://www.askmehelpdesk.com/heatin...ons-58313.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace 3 amp fuse blows after install of honeywell HE360 humidifier [ 4 Answers ]

My wife's uncle installed a new honeywell HE360 humidifier and now the 3 amp fuse keeps blowing? I had a humidifier before and just installed a new onewhat could be the problem? Please help Thank you Larry

Honeywell Thermostat Furnace heat not on [ 2 Answers ]

Hi, We installed a new Honeywell Deluxe 5-2 Programmable Thermostat (RTH6300B) last week. We have a Carrier Furnace that is 15 years old, I believe. We've noticed that the temperature of our house doesn't seem to be reaching the temperature it's set for but have been so busy and out so much...

Honeywell RTH230B - furnace starts often [ 2 Answers ]

I recently replaced my old mercury tilt thermostat with a programmable (5/2) Honeywell RTH230B digital unit. I didn't have too much problem with the install - to a 2 wire forced air oil furnace - however I find the furnace cycling through start and stop much more than usual,to the point to...

Honeywell thermostat heat/cool in Rheem 2 stage furnace? [ 1 Answers ]

I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...

View more questions Search