Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hot dimmer switches
[ 5 Answers ]
I work in a new commercial building and the overhead can lights and ceiling fans are controlled by dimmer switches. The metal switch plates get hot enough to be uncomfortable to touch. When I taped them off to prevent use until the contractor could look at them the glue on the back of the tape...
Dimmer switches
[ 1 Answers ]
I have two dimmer switches with built in night lights on the toggle portion of switch. I noticed that both night lights started to flicker, otherwise the switch and lights work normal. Will the night light just go out eventually or do I need to replace them due to any possible dangers. ...
Dimmer Switches
[ 1 Answers ]
Hi I got new diva dimmer switches installed today by a licensed electrician. Does anybody know if when they are in the off position I am supposed to see a light behind the actual switch? I was just wondering if they were installed correctly. Please help. Amy
Connecting 3 dimmer switches on one circuit
[ 2 Answers ]
In my basement I have three separate single pole light switches that control the recessed lighting. These separate switches were all next to each other and somehow were interlinked with one another. I've moved these switches to one wall and put them in a three gang box, so I can control the...
Lights with dimmer switches buzz
[ 2 Answers ]
The lights in our house that are controlled with dimmer switches all seem to have a faint buzzing sound when turned on. Does anyone know why this is? View more questions Search
|