Ask Experts Questions for FREE Help !
Ask
    marywong's Avatar
    marywong Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 22, 2007, 11:45 PM
    Ceiling fan
    Hi, I have someone installed a ceiling fan by harbor breeze. The fan wobble a little when it is on. Is it normal? I have used an 18 inches extension rod. But also, they have installed the fan at the middle of a vaulted ceiling. They should install it on one side of the ceiling (the fan allow this mounting without) but they install it a the middle creating a small gap between fan and ceiling. Please advice.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 24, 2007, 09:34 PM
    It is normal, but if it bothers you, you can balance the blades. See:

    Ceiling fan blade balancing issues - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling [ 3 Answers ]

I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...

Ceiling fan remote control coverting to light/fan dimmer [ 2 Answers ]

I am currently remodeling my home and am coming across a major problem that NO ONE seems to have an answer for. I have two ceiling fans that operate via remote control. The rest of the ones in my home are the popular "pull down" chains - and those work prefectly with the new fan/light dimmers...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Installed Ceiling Fan: Fan Works/Lights Quit Working [ 3 Answers ]

I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?

View more questions Search