Ask Experts Questions for FREE Help !
Ask
    artab's Avatar
    artab Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 21, 2007, 04:44 AM
    Cold air from blower
    I have a new rheem single stage 50btu gas furnace. When the blower kicks on the air is cool and when it kicks off its cool. The installer said there is no adjustment for this it is pre set at the factory. I have some friends that are telling me this is adjustible the blower kick on air temp. and kick off temp. who is correct?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 21, 2007, 07:29 AM
    Not if it is a high efficiency furnace. It is all programed by the circuit board.
    artab's Avatar
    artab Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 22, 2007, 01:17 AM
    Quote Originally Posted by hvac1000
    Not if it is a high efficiency furnace. It is all programed by the circuit board.
    its only a 80 percent unit. I'm understanding that there is supposed to be a jumper on the board for different temp. when the blower comes on and off but cannot find one. You are probably right then.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air conditioner on.no cold air [ 3 Answers ]

My AC unit has been running for several hours, but the house is no cooler than when it started. What could be my problem?

Home AC Cold Air but not air flow weak [ 4 Answers ]

The air flow from my home ac unit is not blowing very hard, there is cold air coming out of the vents but the air isn't blowing enough to cool the house. I've had it set at 75 all day and the house temp hasn't gone below 82. What can this be? I have called for service and unforunately they may...

Cold Air Registers Blowing Cold Air [ 3 Answers ]

Our cold air registers are blowing cold air worse than if the windows were open. The hot air registers blow cold air but not as forceful (maybe because they are 1/3 the size of the returns) This only happens when the furnace is off and we are heating with the wood stoves. We have metal ducting...

Day & Night forced air heater keeps blowing cold air [ 1 Answers ]

Yesterday my heater was working as normal. Today I replaced the filter in my Day & Night forced air heater. Later I bumped my thermostat when walking by it, but I'm not certain that this caused the problem. My heater turned on and blew hot air. I turned it all the way down, but the fan...

Furnace blower on, blowing cold air [ 4 Answers ]

We installed a pellet stove with the intent of using the furnace blower to distribute the air throughout the home, however, nothing but cold air comes through the vents. Can anyone tell me why this is ?

View more questions Search