Ask Experts Questions for FREE Help !
Ask
    DEBRAWASH1's Avatar
    DEBRAWASH1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 14, 2007, 02:25 PM
    Heater will not work
    The air & heater works from same thermostat.The air works fine,thermostat clicks when set to heat.But nothing happens
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #2

    Oct 14, 2007, 07:06 PM
    https://www.askmehelpdesk.com/heatin...tml#post268314
    johnnyw's Avatar
    johnnyw Posts: 1, Reputation: 1
    New Member
     
    #3

    Oct 30, 2007, 09:07 AM
    Comment on NorthernHeat's post
    While safety is of the utmost importance, the question was still not answered.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heater won't work in auto [ 5 Answers ]

Whenever I turn my heater on in auto it will not come on. I have switched to Run and it comes on but only blows cool air. The pilot light is lit. The A/C works great so I have no idea what this might be, I read that it might be a relay but have no idea which one it is a ~17 yr old Trane unit so...

Goodman gas heater doesn't work [ 8 Answers ]

It's been working all right till this morning. I woke up and the room temperature was around 60 :( . All I know about it is that it is a goodman brand furnace. It doesn't have a pilot, but an automatic ignitor. We followed the instruction to reset it -- shut down the electricity, shut down the gas,...

Heater won't work in bathroom. [ 1 Answers ]

We just remodeled our bathroom and put in a new Heater/Vent/Light in the ceiling. The vent and light work just fine, but the heater won't work. The heater will work when wired to the other wires, but when wired to where it is suppose to go, it won't work. Any help. Thanks.

Goodman Furnace Issue - Heater won't work, no fire [ 1 Answers ]

My Goodman heater won't fire up. When I turn the heat on, the sequence of events: 1) Small fan at top section turns on. 2) Heating element turns on, bright red. The system sounds like it is trying to turn on. 3) Then the bright red goes off. The fire does not light. The fan does not start 4)...

Changed thermostat now heater won't work [ 1 Answers ]

We changed a white rodgers thermostat out to a honewll round and now in order for the heater to come on you must first turn the fan to the "on" position. The heater will come on but won't turn the fan on so the safety sensors turn the heater off when there is no air flow. I was told that we got the...


View more questions Search