Finishing a tub surround

debbelee Posts: 1, Reputation: 1

New Member

Oct 13, 2007, 07:30 AM

Finishing a tub surround

How do I finish a tub surround?

KBC Posts: 2,550, Reputation: 487

Ultra Member

Oct 14, 2007, 06:26 AM

https://www.askmehelpdesk.com/constr...ound-8988.html

Hope this answers some of this question.
Ken

Add your answer here.

Check out some similar questions!

Finishing drywall against a shower surround [ 15 Answers ]

What is the best method for finishing the drywall edges when placing them over the panels of a 3-piece, pre-fab shower surround unit. I know caulk is an option but it's 5/8" greenboard and it would seem that you would need a pretty perfect cut to make this look good seeing as it's the most visible...

Trying to find a one piece tub surround to fit a large jet tub [ 1 Answers ]

I recently purchased a home with a large juccuzzi jet tub (measures 73" long, 36" deep, and I can go as high as 78" to my ceiling) . I would like to put in a new tub surround, however, I have talked with rona, home depot, and many renovators in my area and they all are telling me that I can not...

Tub surround [ 1 Answers ]

I'm redoing my bathroom and have a castiron tub 60x30x14 with a tile ceramic tub enclosure. The tub is in pretty good shape but I would like to replace the ceramic surround with a rigid tub surround that you attach to the studs. My question is do you think that the new tub surround will fit okay on...

Replace Sunken Tub with New Tub & Surround [ 0 Answers ]

I have a 34 year-old tiled concrete sunken roman tub that's too ratty to even think about soaking in. Besides that, the stopper's gone and the whole thing needs to be updated. It's currently being used as a step-down shower. Some dimensions: Length 57", Width 27 1/4", Depth 11"(only 6" after I...