Ask Experts Questions for FREE Help !
Ask
    wilecard's Avatar
    wilecard Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2007, 09:48 AM
    Why doesn't my washer spin
    My washer will fill and aggitate but will not spin . What could the problem be?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 13, 2007, 06:45 PM
    The coupling between the motor and transmission is probably bad.
    trippnchili's Avatar
    trippnchili Posts: 9, Reputation: 4
    New Member
    		  
    #3

    Oct 13, 2007, 09:49 PM
    Mine did that and there is a safety switch to make sure the lid is closed before it will go into the spin cycle. Wait for it to fill and agitate and then open the lid and look for a latch or little switch on the lid or latch area. I just pressed mine and kind of held it down "permanently". It isn't safe but cheaper than getting a new one :/
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ge washer agitates, does not spin [ 5 Answers ]

I have ge washer (wjsr2080t) that agitates fine, but does not spin. I have a feeling it's the water level control as when I remove the air tube from it and restart the spin cycle, it spins like a champ. Just seems odd that this would control spin. But this is a 10 yr old GE that has had so...

GE Washer won't spin [ 1 Answers ]

Sorry for the wrong title - I did some additional test and apparently my original thought is wrong... The model # is WNSE4200A0WW. I took off the cabinet and it is a belt-drive model. The belt feels fine. The motor is running and the belt is working, then within a minute, there are loud noise...

View more questions Search