Ask Experts Questions for FREE Help !
Ask
    dmca30's Avatar
    dmca30 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2007, 04:17 PM
    I have no heat
    My Goodsman furnace is not coming on. My pilot light is on and I tested my thermostat and it working. I changed my filter, changed my SSU fuse and made sure that the doors were closed. I don't see a switch to manual turn it on. I don't know what else to do could someone please help me. It is starting to get cold.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Oct 11, 2007, 06:18 PM
    Did you check to see if the gas valve is in the on position after lighting the pilot.
    dmca30's Avatar
    dmca30 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 12, 2007, 07:27 AM
    It should be I have not touched any thing from last year.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #4

    Oct 12, 2007, 04:59 PM
    Did you check for low votage power coming from the stat telling the gas valve to open?
    Is there low voltage from the transformer to the stat?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

GFA Heat; Poor Heating in Apt - Heat is Trapped Near the Ceiling [ 6 Answers ]

In a nutshell: The warm-air registers in my apt are at the very top of the ten foot high walls. Hot air does not circulate properly to heat my 1-bedroom apartment. Details: Based on what I know about the basics of energy, heat rises. And I can't for the life of me understand who thought...

Changing from gas heat to electric heat [ 3 Answers ]

How do you change from Apollo gas heating system to electric heating system?

Heat runs with ac and even auto kicks on emg heat [ 1 Answers ]

(Coleman Evcon) Some how the hot and cold on the inside thermostat switched.how is that possible?and how do I fix it?

Electric heat pump auxilery heat problem [ 4 Answers ]

Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not....

View more questions Search