Ask Experts Questions for FREE Help !
Ask
    alibri07's Avatar
    alibri07 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2007, 04:38 PM
    Ge dryer not working
    Dryer was working until I turned the start knob. There was a pop sound and we thought all we had to do was replace the knob. After replacing it we tried to start it and nothing happens. If you put your hand on it while turning the start knob you feel a faint vibration
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 11, 2007, 04:43 PM
    First check to make sure you have 220 volts going to it and that you did not pop a breaker. Next check the thermal fuse for continuity. Unplug unit and remove 1 lead frim it. If no continuity, replace it. It is about 3/8" wide and about 3" long and located on the back side of the blower motor housing
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool dryer not working, but timer is [ 12 Answers ]

I have a whirlpool dryer that just stopped working. I set the timer and press start. I can hear the timer working, but the drum does not engage. If it was a bad door sensor, would that still let the timer operate? Not sure what to do. I do not have a volt meter. Any help?

Gas Dryer Not Working [ 9 Answers ]

Need help please: Dryer Model Details MOD: 110.76812695 SERIAL: MJ3620970 TYPE: DWSR-NAT-1206006-CV22 Started about year ago and I ignored it :( The dryer for some reason stopped getting warm for certain Fabruic Temperatures: High Cotton stopped working, so I just used permanent press ...

Gas dryer heat not working [ 1 Answers ]

My Kenmore heavy duty 80 series gas dryer is currently at a state where it starts to work for five minutes then the heat quits. The dryer stays running and the clothes do not dry. What is wrong and how do I fix it?

Dryer timer not working [ 1 Answers ]

I just moved into an apartment with what seems to be a new Kenmore Electric Dryer (model no. 110.62602101) --the film was still on the instrument panel -- which heats fine but it does not time and shut off or shut off when the clothes are dry. Any ideas?

View more questions Search