Ask Experts Questions for FREE Help !
Ask
    78Vette's Avatar
    78Vette Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2007, 11:16 PM
    Several Tools that require 220V
    I have several Tools that require 220V. Problem is I only have one 220 receptical.
    Instead of having to disconnect tools all the time, I am wondering if there is a power strip available for 220V.
    ( only using 1 tool at the time!)
    Thanks
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Oct 11, 2007, 03:39 AM
    What sort of plugs do your tools have? Some outlet strips just have regular outlets in them. You could replace them with actually 240 volt ones. Watch the power rating. You would also have to replace the plug.
    78Vette's Avatar
    78Vette Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 11, 2007, 01:07 PM
    I have a CR20 outlet. Might have to change that though as it is rated at 20 Amp. Welder wants 21.8 Amps, according to the manual.
    STill looking for the power-strip though.
    Thanks
    RustyFairmount's Avatar
    RustyFairmount Posts: 165, Reputation: 40
    Junior Member
    		  
    #4

    Oct 11, 2007, 01:19 PM
    You could make one, I suppose.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Universities that do not require toefl [ 7 Answers ]

Us unversities that do not require toefl test?

Can I rig 2 generators (220v bi-phase) to get 220v three fase [ 2 Answers ]

I have two 6000 watt generators that are bi-phase and want to run a 5hp motor that is 220v / 3 phase. Is it possible? How would the wiring go? I'm in Mexico and can't find a rental... well I found varios but no one that can hook up my motor.

Small script require... Please help [ 2 Answers ]

I have a new accounts section, where each person has his own driectory on my website (e.g. www.blank.com/thepersonname). How do I make a box (lets call it "box1") where the person enters his user name in (e.g. "yoyoyo123" - again in "box1") and a button (lets call it "button1") that makes the...

220v 50a welder, 220v 30a dryer plug [ 1 Answers ]

I just got an arc welder that is 220v 50a. I thought I could plug it into the 220v receptacle in my garage, not realizing how many different types of 220v plugs and amperages there are. The receptacle in my garage turns out to be a 220v 30a dryer plug. My question is can I just change the...

Require Help With Maually Setting Up Cpu [ 2 Answers ]

HI, I'm a litlle lost with the whole bios aspect of computers and need guidance I recently bought s AMD ATHLON 2400+ (socket A) with my new motherboard ASUS A7V600-X (I have checked with manufactuers these components do work together(NORMALLY)) however in bios its settings are 1500, 2000, 2500,...

View more questions Search