Ask Experts Questions for FREE Help !
Ask
    BigRiver's Avatar
    BigRiver Posts: 7, Reputation: 1
    New Member
     
    #1

    Oct 9, 2007, 09:05 AM
    Sink Disposer Doesn't Run
    Our kitchen sink disposer stopped running, it makes a buzzing noise only when turning on the switch. Pushing the Reset button on the bottom of the disposer does not help. Anybody know how to resulve this problem? Thanks.
    ac101's Avatar
    ac101 Posts: 463, Reputation: 57
    Full Member
     
    #2

    Oct 9, 2007, 09:30 AM
    Sometimes something becomes stuck inside jamming the cutting teeth of the disposer thereby stopping the motor. First get a flashlight turn the power off at the switch now look down inside to see if you see any obstructions. If you see something there you may be able to free it up by manually turning the motor once again BE SURE THE POWER IS OFF There is ussually an allen head bolt in the center of the bottom of the disposal. There is an allen key that comes with most disposals when there installed. If you have this great if not locate the bolt I'm talking about and find the proper allen to fit it. Then try slowly turning the bolt back and forth does it feel stuck in either direction listen for grating or grinding noises while turning it. If you can get the motor to turn this way then turn it a couple of times remove the allen key and test it at the switch. When you look inside look for any damage to the unit as well as anything metal. I had one lady call me up because of a similar problem turned out her diamond ring is what had it stuck she had been looking for the ring for two days. I do not recommend sticking your hand down in the disposer for any reason use a pair of needle nose pliers or something else if you must reach inside and once again make sure the power is off while servicing the disposer. If you need more info or I have missed anything please post back. GOOD LUCK, AC
    ac101's Avatar
    ac101 Posts: 463, Reputation: 57
    Full Member
     
    #3

    Oct 9, 2007, 09:38 AM
    If you have problems locating the bolt to manually turn the motor post back with the model number and Ill try to help. By the way how old is the disposer?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Disposer T Clog Problem [ 3 Answers ]

I have a 3/4 HP disposer. I am having problems with clogs at the T fitting above the P trap where the horizontal pipe from the disposer connects. It seems the deflector which reduces the opening size inside the T fitting is the cause of the problem. I previously had the same problem and fixed it...

Garbage Disposer Always Creates Backup [ 7 Answers ]

I just installed a new garbage disposer for my parents a few days ago (when the old one broke years ago, they never replaced it, just removed it and redid the sink drain). The disposer works fine, and I ran everything according to the instructions, but there's a problem somewhere in the line that I...

Stopped Kitchen Sink Disposer [ 4 Answers ]

My kitchen sink disposer just stopped working. The problem started with an initial humming sound coming from the motor when I switched on the disposer and after a while stopped working altogether. Don't know if this means the unit is burnt or just something that can easily be fixed by me. Any...

Run, Cindy, Run [ 4 Answers ]

Fresh off her retirement from the antiwar movement a month and a half ago, Cindy Sheehan is not only embarking on a caravan and "walking tour" to Washington DC, she is threatening to run against Madame Pelosi if she "does not file articles of impeachment against Mr. Bush by July 23." All I can...

Disposer plugged [ 2 Answers ]

Hi. My kitchen sink disposer must be pluged up. The motor runs, and the water swirls, but it stays in the sink. I have tried using a plunger. That did the job a while back, but not this time. It is an IN SINK ERATOR. Any suggestions? toddao


View more questions Search