Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Disposer T Clog Problem
[ 3 Answers ]
I have a 3/4 HP disposer. I am having problems with clogs at the T fitting above the P trap where the horizontal pipe from the disposer connects. It seems the deflector which reduces the opening size inside the T fitting is the cause of the problem. I previously had the same problem and fixed it...
Garbage Disposer Always Creates Backup
[ 7 Answers ]
I just installed a new garbage disposer for my parents a few days ago (when the old one broke years ago, they never replaced it, just removed it and redid the sink drain). The disposer works fine, and I ran everything according to the instructions, but there's a problem somewhere in the line that I...
Stopped Kitchen Sink Disposer
[ 4 Answers ]
My kitchen sink disposer just stopped working. The problem started with an initial humming sound coming from the motor when I switched on the disposer and after a while stopped working altogether. Don't know if this means the unit is burnt or just something that can easily be fixed by me. Any...
Run, Cindy, Run
[ 4 Answers ]
Fresh off her retirement from the antiwar movement a month and a half ago, Cindy Sheehan is not only embarking on a caravan and "walking tour" to Washington DC, she is threatening to run against Madame Pelosi if she "does not file articles of impeachment against Mr. Bush by July 23." All I can...
Disposer plugged
[ 2 Answers ]
Hi. My kitchen sink disposer must be pluged up. The motor runs, and the water swirls, but it stays in the sink. I have tried using a plunger. That did the job a while back, but not this time. It is an IN SINK ERATOR. Any suggestions? toddao View more questions Search
|