Ask Experts Questions for FREE Help !
Ask
    mseleman's Avatar
    mseleman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2007, 04:07 PM
    Blower/Vac Cord Doesn't Work
    I was in the middle of using my Troy-Built blower/vac when it ran out of gas. It made a funny clicking noise when it stopped running. After I refilled the reservoir with gas, I was unable to restart it. The cord does not seem to pull out completely and therefore won't start the engine. Any ideas?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Oct 7, 2007, 05:41 PM
    There is a good possibility that he cooling fins on the engine got clogged with leaves and the engine overheated. The cylinder wall is usually made of aluminum. I think that there is internal engine damage.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Oct 7, 2007, 07:32 PM
    Or it could be that there is a screw loose in the blower cooling fin wheel and hanging the fins, or a piece of the fins could be broken off and hanging it. Remove the outer housing and visually inspect unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace blower cord [ 1 Answers ]

Replace blower cord

Blower won't work [ 2 Answers ]

Why won't my blower come on .My central air and heat unit will not blow out air.the compressor still comes on outside.There is cool air and moisture inside by the furnace and blower.I have changed the thermostat.It still won't blow.It is a Ruud.

Blower does not work [ 4 Answers ]

I just spent $500 repairing my heater/furnace. The guy told me that the board was bad and he replaced it... The heater worked fine for about a week and now th eblower does not work on auto nor when I turn it on manually... Any ideas what could be wrong? I have a strange feeling that the guy fix...

Blower won't work On A/C [ 1 Answers ]

Hi, My furnace fan blower won't come on when the a/c is on, the unit outside is working, then if I switch it to heat the fan blower works! Hope you can help me. I checked the fuses, also changed the filter. Thanks, Sandy

Blower fan does not work [ 1 Answers ]

Hello: I got a Carrier AC unit in my residence since 3 years ans has been working fine until today: the fan at the outside unit does not move at all. I check the fuses at the circuit box next to the unit and found nothing wrong. Whenever the AC kicks in I hear a click and hum at the unit but the...

View more questions Search