Ask Experts Questions for FREE Help !
Ask
    kathyjeremy31405's Avatar
    kathyjeremy31405 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2007, 09:33 PM
    Minolta not working
    I just bought a Minolta Maxxum HTsi camera. I took an entire roll of film in order to get familiar with the unit. When I took them to be developed, there was nothing on the film at all. Can anyone tell me why? The photo clerk said that it had not even been exposed. PLEASE HELP
    lschoeggl's Avatar
    lschoeggl Posts: 28, Reputation: 3
    New Member
    		  
    #2

    Oct 29, 2007, 08:03 AM
    It sounds as though the film may not have been advancing. I'd suggest taking another roll of film as a test. If the same thing happens you will need to get in touch with Minolta technical support or return the camera to the store you purchased it from. When testing your second roll, be sure that the film sprockets completely line up with the gear wheels so that the film stays in place and advances correctly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dodge Ram A/C working, then not working [ 4 Answers ]

I have a 2001 Dodge Ram 1500. Within the last year whenever I turn the a/c on it will work fine and after about 5 or 10 minutes will start to blow hot air as if I turned the a/c off and had the fan blowing outside air. At first I started turning the a/c off and then back on which would...

Fridge not working then started working [ 2 Answers ]

I have a side by side whirpool refridgerater it is two years old when I got home it was not cooling the fans were on but compressor was not on as soon as I walked away the compressor came on but within two minutes it clicked off so I thought it might be the overload but then it kicked back on and...

Previously working electrical outlets stopped working [ 2 Answers ]

Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...

View more questions Search