 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Washer machine
I have a 70 series Kenmore washer that stopped spinning. It pumps and drains but it won't spin. At first it stopped spinning on all cycles but one. Now it's not spinning on that cycle either. I've checked lid switch and the motor coupler... what next?
Mike |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Is the end of the water exit hose from the washer machine needs to be higher then the top of the washing basin of the machine. Could this connection be made with an air tight assembly that will not be looking more like a cut open pipe with a black plastic hose hanging in it? Thank you. Ps: I...
I have a 7 yr old washing machine that does not shut off once it is filled up? It sometimes does turn off but recently I have even put it on a small load and the water still runs when it goes into the next cycle? Is it some type of sensor that needs to be fixed? Is it an east task and should I try...
Hi ! It appears that the washer machine overflows when the water valve is turned on. The machine itself is not even running when this happens. The water overflow is dirty.We have to leave the water turned off to prevent further flooding. We are not currently living in this house. It is a...
All right, I live in a mobile home, and my water valves for th ewasher machine are leaking. I bought a new setup up valves that are brass. But I got to look and I have that poly something lines that the water run through. My question is can I use compression fittings to hook the poly lines to...
View more questions Search
|
