Ask Experts Questions for FREE Help !
Ask
    pdean814's Avatar
    pdean814 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Oct 3, 2007, 07:08 AM
    Replacing adjustable drain in concrete slab
    This is my first post. I'm installing a new shower. After digging up the old mortar to put in a new shower pan I have the shower drain sticking out of concrete. I want to replace it. Can you suggest how I remove it? Do I cut it off and install the other one I bought. Any help would be appreciated.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 3, 2007, 07:16 AM
    You must first tell us what material the pipes are made of. Is this a caulk on drain or a flange type shower drain? What do you wish to replace it with? In short, we need more details before we can answer. Regards, Tom
    pdean814's Avatar
    pdean814 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Oct 3, 2007, 07:23 AM
    The pipes are PVC. I bought an adjustable shower drain that comes apart. The one that is on there now is not sunk into the concrete like the new one is supposed to. Hope this answers your questions.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Oct 3, 2007, 07:43 AM
    Quote Originally Posted by pdean814
    The pipes are PVC. I bought an adjustable shower drain that comes apart. The one that is on there now is not sunk into the concrete like the new one is supposed to. Hope this answers your questions.
    The old PVC drain will have to be cut out. If you can't get a saw down thetre use a inside PVC cutter,(see image). Good luck, Tom
    pdean814's Avatar
    pdean814 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Oct 3, 2007, 08:08 AM
    How far down the PVC pipe should I cut or can I just use a hacksaw and cut level at top of concrete? Will I need to dig our more concrete or not?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moving tub drain in concrete slab [ 1 Answers ]

We are remodeling our master bath and we need to move the tub drain from the back center to the left hand side. Would there be a problem if we need to put the pvc lines across the back with an L and to the left had drain. The existing drain is centered on the back wall from the old garden tub,...

How locate pvc drain under concrete slab [ 1 Answers ]

Eight years ago, I had a bathroom and office installed downstairs. Along the way, they dug a trench through the existing concrete slab and put in the appropriate pvc drain. This "underslab" drain runs under my office. Now I want to find out exactly where this drain is located so that I can put in...

Seal drain opening in concrete slab [ 1 Answers ]

I have just installed a one piece tub/shower unit in my basement. I had to break out about 15 inches of concrete slab from the box that was originally there to accommodate a tub. The hole is completely under the tub which which will be framed into the walls on 3 sides. Should the opening in my slab...

Bathtub Drain concrete slab [ 1 Answers ]

I'm just finishing up the basment. The bath drain is roughed in. My problem is the rough-in is on the wrong side. I want the bathtub installed with the plumbing fitures on the same wall as the toilet. Can I run a drain line under the tub?

View more questions Search