Ask Experts Questions for FREE Help !
Ask
    momdannie's Avatar
    momdannie Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 29, 2007, 09:47 PM
    Does an Amana Dryer Have Two Belts
    I am Looking for a diagram to replace belts on our dryers. I don't know and can't find out if there is two or one. OR how to get to it.:mad: Can't find were they go. Help. Any help would be appericate.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 30, 2007, 04:53 AM
    It only has one belt. Remove the cabinet front and the blower inlet duct. Reach back an disengage the drive belt belt from the idler. Remove the four screws from the bulkhead ( the bottom front corners of the bulkhead are supported by slots in the cabinet sides) This will help your support and align the bulkhead when assembling. While holding the drum in place, lift out the bulkhead. Now lift out the drum and replace the belt. When reinstalling the belt, it goes around the drum,the idler pulley the motor pinion.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Amana LE8207W2 Dryer [ 1 Answers ]

We have a dryer which is about five to six years old and has been having a problem. We went to get it checked out and the heating element was fine. The dryer then ran for a week perfectly and then stopped again, this time when the button is pushed in it makes a high pitched sound but does not...

Amana dryer lga60aw [ 3 Answers ]

I've had my amana dryer model #lga60aw for about 8 years and never had a problem until now. It doesn't heat up. It looks like it's drying but it's cool air instead of hot air. Any suggestions?

View more questions Search