Not your question?
Ask your question
View similar questions
Check out some similar questions!
Vapor barrier in Bathroom
[ 7 Answers ]
I am doing a bathroom remodel in my Central PA home. I have heard several different opinions on how to install a vapor barrier. I was told by one person that I should install unfaced insulation on all exterior walls and then install a 4 mil poly vapor barrier. After that, I should install green...
Shower stall vapor barrier
[ 3 Answers ]
I'm building a new tiled shower stall with cement board backer. I've read that a vapor barrier should be placed over the wall studs before the board is installed, because the tile/cement board combination is not waterproof. We have an acrylic shower receptor, the directions for which also...
Vapor pressure switch
[ 1 Answers ]
Hello, My 35 year old compressor finally died so I'm replacing it with a unit I scavenged a while back. I'm 95% sure the "new" unit has no mechanical problems since it was almost new when it was replaced. (Renter's dogs chewed up the low voltage wires so the landlord blindly ordered the entire...
Sodium Vapor Lighting
[ 1 Answers ]
These outdoor flood lights blink, flash on/off or go out entirely when they are defective. Sometimes it appears to be a defective lamp, while other times the ballast will need replacement. These new ballasts have the capacitor glued directly to the transformer. The manufacturer clearly wants you to... View more questions Search
|