Ask Experts Questions for FREE Help !
Ask
    chasmetal's Avatar
    chasmetal Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2007, 02:19 PM
    Gas furnace
    A code comes up on my new installed gas furnace," incorrect line voltage phasing" Can anyone tell me what this means. Thank You.
    corydec's Avatar
    corydec Posts: 17, Reputation: 2
    New Member
    		  
    #2

    Sep 25, 2007, 03:45 PM
    Switch the wires on appliance plug around you might have the wrong polarity
    wheatnbarley24's Avatar
    wheatnbarley24 Posts: 63, Reputation: 3
    Junior Member
    		  
    #3

    Sep 25, 2007, 05:03 PM
    Either polarity like corydec said or poor grounding
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace [ 2 Answers ]

For the past 2 nights my furnace has been blowing out cold air. I have a furnace which is equipped with an ignition device which automatically lights the piolet. I did everything from cutting off the gas valve and power to furnace. When I restarted everything back up, the furnace came on but no air...

Gas furnace [ 3 Answers ]

Gas furnace made roger white 505a-241 contaroller flash 3 times error code that means pressure switch stuck open. I don't know and where is the pressur switch. Please help. Thanks

Gas Furnace vs. Oil Furnace [ 2 Answers ]

I have an oil furnace with CAC that needs to be replaced in a 30 year old house. Keep the Oil system or replace with Gas? What Brands for each?

My gas furnace won't come on by itself. [ 3 Answers ]

I have a goodman furnace.. I replaced the thermostat.. that was'nt the problem.. my heat won't come on by itself.. my husband has to go in the basement and unplug the air pressure switch.. it will then run for about 1/2 day.. then, he has to do it again.. we think it is the air pressure switch, but...

Gas furnace [ 14 Answers ]

Igot a 1972 carrer furnace it catches fire at the spud part of burner I got 11.5 inch watter column preasure on line you can cut it off turn it back on and it burns good blaze looks good I need some comet on air ajustment or what might be causing this I have cleaned the burners , thanks.

View more questions Search