Ask Experts Questions for FREE Help !
Ask
    spiveyg's Avatar
    spiveyg Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 16, 2007, 12:33 PM
    Backfiring after stalling on 12.5 yard machine
    Well, I'm scratching my head now. Subject is a Yard Machine 12.5 mower just over a year old. I recently moved (mower included) and the first time I used the mower since the move, after running for about 10 minutes, it died while I was hooking up the yard trailer (mower idling). It just shut off like it ran out of gas. It's been outside and uncovered for the first time, so I drained the gas and carb bowl to see if water was there. None. Also checked the spark plug. It wasn't fouled, but I changed it anyway. Still wouldn't start. So I gave it a break (me) and tried again today. It fired up today, but continuously backfired through the carb while running, so I pulled the crank bolt and checked the alignment key and it's perfect, so I'm at a loss. I can feel the compression and exhaust strokes when turning the engine by hand, so?? Not sure what else to do, but the lawn is going to outgrow the house if I don't fix it soon!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Sep 17, 2007, 10:58 AM
    Check your valves?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mtd yard machine [ 2 Answers ]

My MTD 14.5 hp yard machine has been hard to start for a while. Turn the key and back off several times before it will start.. I replaced the ignition switch and the solenoid and now it does not even make a sound. What else could it be.

MTD 14.5 HP Yard Machine will not crank [ 1 Answers ]

I have a MTD Yard Machine with a 14.5 HP B & S engine model # 287707 0224-01. I have changed the battery, the air filter, and the spark plug, but it won't crank. It will turn over, but won't start. I took the filter off and started it and it spit out a fluid from the air intake. But when I put...

Yard Machine troubeshooting [ 3 Answers ]

Hi, I have an MTD manufactured Yard Machine ride-on lawn tractor. Everything runs smoothly until I engage the PTO (cutting blade). The machine is in the correct gear with the throttle open the correct amount and the deck lowers without incident. Yet when I attempt to engage the blade, the...

Yard Machine Mower [ 1 Answers ]

I have an 18.5HP MTD Yard Machine that the choke cable will not pullout on. How can I fix this?


View more questions Search