Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Concord Gas Furnace
[ 2 Answers ]
I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...
Concord 80 plus gas furnace- Blowing cold air & LED Flashes 4 times
[ 4 Answers ]
I am a new home owner and have never dealt with a newer furnace. I woke up and the furnace was blowing out cold air. The LED inside of the furnace flashes four times which says 'Limit or Rollout Switch Open' I honestly have no idea what that means and I really do not have the money for a...
Open limit switch on Concord Gas Furnace
[ 14 Answers ]
I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...
Concord Gas Furnace with run time problems.
[ 5 Answers ]
We have a Concord Gas Furnace that is about 3 years old. The furnace seems not to respond to the thermostat. We replaced the thermostat with a new digital one but are still experiencing the same issues. We set the thermostat to 83 just as a test. I had my wife record when the furnace came on...
Leak in a water coil in the furnace
[ 1 Answers ]
Our furnace which also heats our water was leaking out a tube on the side of the furance. The oil company turned off a valve and told us we had a pin hole leak in our water coil if the pressure got to 30 or above. Does this sound correct to you?? View more questions Search
|