Ask Experts Questions for FREE Help !
Ask
    cattheman3143's Avatar
    cattheman3143 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 12, 2007, 09:46 PM
    Going back over already sweated in pipe (fix a bad sweat)
    I recently sweated copper pipe, and wouldn't you know it, out
    Of approximately eight joints, there was one small drip. What's
    The best way to fix this--- do I have to sweat off the piece that's
    Leaking. It's leaking at a 3/4 inch union. Can this be reused if I
    Can get it apart? Or is this already sweated union now garbage?
    Do I have to cut it out and redo it completely. Very frustrated.
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #2

    Sep 13, 2007, 06:15 AM
    Pulling it apart, cleaning, fluxing and completely redoing it is the best approach -- Reheating the joint would actually be just 'tinning', instead of soldering (any flux left in the fitting would have been washed out from the pressure of the water being turned on).

    You're lucky, though, it couldn't have happened at an easier joint to repair.
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
     
    #3

    Sep 13, 2007, 07:23 AM
    If you previously or in taking it apart over heat the joint it will not solder well.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How I treat a bad smelling sweat [ 12 Answers ]

What is the cause of bad smelling sweat and what is the solutionfor this problem

Bad sweat smell [ 2 Answers ]

My sweat smell is very bad although I used anti - sweat Iamb 20 years and this problem begin at 13 years old And also my mouth smell is very bad If there is any solution please answer me Thank you

Should I use colorzap and how do I fix my bad perm? [ 1 Answers ]

I have gray that I cover at home with Loreal products and for the longest time I didn't know that I shouldn't dye my whole head instead of just the roots. Now my hair is darker on the ends, and looks horrible. I went to a salon and asked if they thought that I should perm my hair, that I color...

Rusted drain pipe broke off, how do I fix it... [ 1 Answers ]

We were having some kitchen cabinets installed and the drain pipe the goes into the wall for the sink broke off, well part of the threads broke off inside the 45 deg. Connector inside the wall. I can see the 45 deg connector and it looks fine and so does the pipe inside the wall, we removed the...


View more questions Search