Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Wiring for Electric Furnace
[ 2 Answers ]
I'm want to install the thermostat on our Electric Furnace. The wire leading to the furnace is a two wire (BLACK AND WHITE WIRES) It's heat only. The thermostat has a W and an R on the back of the stat. The furnace terminal has Y,W,O,C,G,F. The WO has a jumper between them? The W has a White...
Testing Electric PTO Clutch
[ 3 Answers ]
Troy Bilt 22hp Briggs/46'Deck Electric PTO clutch will not engage. Have changed out switch on the mower console... still no good. Removed clutch, looks OK. IS THERE ANY WAY TO TEST THIS CLUTCH?? Or should I look somewhere else... worked great one day,, the next week NOTHING!
Electric baseboard thermostat
[ 1 Answers ]
I need help replacing an old electric baseboard thermostat with a digital programmable one. Keep in mind, I do not know much about electricity/circuits, etc. The baseboard specs are 240V, 1000-1250W (two 1000W, one 1250W in the living room). They are running on a double pole, 20Amp circuit. I...
Kenmore Electric Dryer Thermostat
[ 1 Answers ]
I am replacing the thermostat on a Kenmore electric dryer. I need to know which terminal the red wire goes on. There are 3 terminals numbered 1, 2 and 3.
Electric water heater thermostat
[ 1 Answers ]
How do you troubleshoot a thermostat on an electric water heater to verify if its working or not? Bench testing and testing on unit? View more questions Search
|