Ask Experts Questions for FREE Help !
Ask
    Jalowiec's Avatar
    Jalowiec Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 9, 2007, 11:45 AM
    Maytag Washer model LAT9316AAE
    I need a diagram of my maytag washer to replace the spin cycle belt # 211124. Maytag washer model # LAT9316AAE
    Jalowiec's Avatar
    Jalowiec Posts: 4, Reputation: 1
    New Member
     
    #2

    Sep 9, 2007, 05:04 PM
    Hey everyone it was just the belt at the bottom of the washer. My washer was not spinning
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #3

    Sep 9, 2007, 05:13 PM
    I don't have a diagram but there are 2 belts. Thry are simple, just pulley to pulley. One goes from the pump to the motor and the other from the trans to motor The pump belt will be closest the machine at the motor and the trans to motor belt will be closet to the floor. The pump will have 3 adjusting screws for belt tension. Hope this helps

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Refrigerator, Model # MTB2456AEW [ 3 Answers ]

How do you remove the plastic shield to change a light bulb in a Maytag Refrigerator, Model #MTB2456AEW?

Maytag refrigerator model MTB2455ARW [ 1 Answers ]

Yes the frig is staying at 50 degrees and the freezer at 35-40.we've tried all the ideas we've found on the web. Cleaning, coils , shutting down frig and leaving it open for a day. We have taken the back panel off inside the freezer twice, defrosted it and plugged it back in, both times the...

Maytag dryer Model LDE482 [ 1 Answers ]

The dryer won't spin. I disconnected the belt and it still wouldn't spin. I took the motor out and it will turn 1/8 turn in either direction but no more. Is there an electric brake on these things or should it spin freely by hand with no power on? The ohmmeter shows 1-2 ohms between the...

Maytag dryer model pye2000ayw [ 1 Answers ]

My husband is trying to replace the belt on our maytag dryer, but he is having problems threading it. Can anyone help?:(


View more questions Search