Ask Experts Questions for FREE Help !
Ask
    Jalowiec's Avatar
    Jalowiec Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 9, 2007, 11:52 AM
    Whirlpool Ice Maker
    My ice maker suddenly stopped making ice; can anyone help me out here?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 9, 2007, 11:55 AM
    Is the lever in the position to make ice? Is the freezer temp 5 degrees or colder? Is water running into the tray?
    Jalowiec's Avatar
    Jalowiec Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Sep 9, 2007, 12:01 PM
    Quote Originally Posted by esquire1
    Is the lever in the position to make ice? Is the freezer temp 5 degrees or colder? Is water running into the tray?
    I don't know if I am answering the right way, but the level is in place and how do I know if water is filling the tray?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Sep 9, 2007, 12:11 PM
    There is a fill tube at the rear of the freezer that will let water flow into the tray. If no water is comeing into the tray look at the lower back side of the unit and check to see if you have water at the supply line. The water valve could be bad. Do you have a filter on the water line at the back side of unit? If so is it clogged?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE Gold refrigerator ice maker leaking into the ice tub [ 2 Answers ]

I have a 3 year old GE Gold stacked refrigerator/freezer. The ice maker is leaking into the ice bin. The leak is a slow, constant drip that freezes into an icesicle. Annoying. Any advice would be appreciated ! :confused:

Ice Maker on Whirlpool Refrigerator will not eject Ice [ 3 Answers ]

Any ideas. Thanks

Whirlpool ice maker probs [ 1 Answers ]

After it makes one batch, it refills (the way it is supposed to), freezes the new water, then skips the unloading of the new cubes and runs more water (all over the place) as if it were refilling an EMPTY ice tray. I take it apart. Remove the frozen cubes. Replace the maker. The next batch makes...

Whirlpool Ice Maker Problem [ 0 Answers ]

My ice maker stopped working. I replaced the valve and connected all the hoses and wires back up. Then I turned the ice maker on, and when it cycled and the water came on to fill the ice maker, the water came out of the water in the door dispenser. I checked the wires on the valve to make sure I...

View more questions Search