 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Leviton 6260M-W timer in a 3-way circuit
Greetings all, What a great forum.
I'd like to have a timer to control the lighting in my daughter's bathroom. (what a shock!) It is a Jack and Jill bathroom so the lights are controlled by a 3- way circuit. Is the a way to wire a Leviton 6260M-W timer in a 3-way configuration? If not that model, perhaps another similar model? Thanks, Tony |
||||
|
||||
|
That timer requires a neutral, which you may or not have. You need a timer with an SPDT contact for 3-way operation.
The SPDT mechanical timers here Intermatic Timers - In-Wall Timers - Spring Wound "Bypass" Timers Will work. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I purchased the Leviton PR180 to wire into a 3-way switch installation. My setup is exactly like the wiring diagram in the instructions, but I cannot get the #1 switch (original 3 way switch) to turn the lights on after the motion detector has timed out and turned off the lights. I...
Greetings fine folk, 1) First time posting so if I mess up or this is the wrong forum please have mercy :) 2) I work for a medium public library and we are looking for a timer client/café timer for the 12 PCs we have available for library patron use. These 12 PCs are connected to the Internet...
I purchased a Leviton 6124H programmable timer to replace the switch in my garage which controls 2 outside lights for my driveway. The wiring diagram that comes with the switch is attached as a .bmp file (or it can be viewed online by looking at the instruction sheet at Site: Product Details ...
I have 2 sets of wires with 3 wires at each location. I know which wire is the hot wire coming in (only 1wire at box #1). Other than that I'm not sure where to connect the other wires?
View more questions Search
|
