Ask Experts Questions for FREE Help !
Ask
    stacybass's Avatar
    stacybass Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2007, 02:50 PM
    Our unit is not cooling and triping outside breaker, a carrier tech came out and said " system check good, charge good, amp draw on compressor good 18, so my husband replace the outside fuse and cooled well but know it is still running ,not cooling and tripping breaker, and know there is a pop noise coming from outside unit every 1-2 second please help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 5, 2007, 03:02 PM
    Already answered
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Treadmill Tripping Breaker [ 21 Answers ]

We just bought a new mid-range treadmill rated for 11 amps. Our house is relatively new (about 2 years) and the electrical was checked for code by a home inspector when we purchased the house. The treadmill manual stated it was required that it be plugged into a single outlet surge suppressor...

Breaker keeps tripping [ 24 Answers ]

I need to figure this out. I have two 15 amp space heaters in my garage and when I turn them both on it throws the breaker. The breaker at box for this is rated at 20amps. I have been told that I can run both on high and won't throw the breaker. I also replaced the old breaker with a new one (same...

Breaker for AC Tripping [ 3 Answers ]

I have a split system & Air Handler. Any idea why the breaker keeps tripping?

Why does my ac breaker keep tripping its only 3years old [ 2 Answers ]

Yes we just brought this house in 2007 was built in 2003 went to use the ac for the first time we have a weather king heat pump ac unit and noticed the breaker would trip when the thermoset was turned downed I even changed the breaker and is not that cause the breaker works with the dryer it's a...

50 amp ground fault breaker for spa tripping [ 1 Answers ]

I read four similar questions, but I am sure I didn't make any of the mistakes mentioned in their answers. I wired a new service for a used hot tub I recently purchased. I put a paired 50 amp breaker in my main panel and connected them to a 50 amp Cutler Hammer Hot Tub Panel with about two feet...

View more questions Search