 |
|
|
 |
New Member
|
|
Sep 3, 2007, 12:34 AM
|
|
Ceiling fan remote problems
I have a Hampton Bay Ceiling fan and I also bought a Hampton Bay remote to go with it. The light and fan work fine without the remote. The remote will only control the fan... why won't it control the light dimming action? Thanks!:(
|
|
 |
Uber Member
|
|
Sep 3, 2007, 12:03 PM
|
|
|
|
 |
New Member
|
|
Sep 4, 2007, 12:20 AM
|
|
I connected the white to white, blue to blue, and black to black from remote to fan. Then I connected the male and female connectors from remote to fan. Coming from the wires in the ceiling, I connected the white to white, green to ground, and black to black. I didn't use the red wire from the ceiling. There was just a ceiling plate in its place before... no fan. I will keep you in mind if I come across others.
|
|
 |
New Member
|
|
Sep 4, 2007, 12:21 AM
|
|
I connected the white to white, blue to blue, and black to black from remote to fan. Then I connected the male and female connectors from light to fan. Coming from the wires in the ceiling, I connected the white to white, green to ground, and black to black. I didn't use the red wire from the ceiling. There was just a ceiling plate in its place before... no fan. I will keep you in mind if I come across others.
|
|
 |
Uber Member
|
|
Sep 4, 2007, 05:01 PM
|
|
Does the light come on at all? Did you connect it in the switch housing?
|
|
 |
Ultra Member
|
|
Sep 4, 2007, 05:04 PM
|
|
Off the subject a little here, but if it is only a ceiling box in the ceiling and you are connecting a ceiling fan there, you may want to inspect the attic area and see if the ceiling box is mounted and supported per fan manufactures specs.
|
|
 |
Uber Member
|
|
Sep 4, 2007, 05:06 PM
|
|
A good idea, but definitely wouldn't cause the remote problem.
|
|
 |
New Member
|
|
Sep 5, 2007, 03:07 PM
|
|
The light comes on but will not dim or cut off with remote. Thanks.
|
|
 |
Uber Member
|
|
Sep 5, 2007, 04:53 PM
|
|
So the light is on all the time? Does the LED on the remote light up when you use the "light" button?
|
|
 |
New Member
|
|
Sep 7, 2007, 04:07 PM
|
|
The Red Led Light Comes On But Does Not Effect The Light. The Light Stays On All The Time Unless I Turn Off The Wall Switch. I Tried Switching Battery From Duracell To Energizer And Still Have No Luck. Thanks.
|
|
 |
Uber Member
|
|
Sep 8, 2007, 01:26 PM
|
|
It sounds like the receiver is bad. Return it to the store.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen.
I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days.
Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Need a Fan Remote for Halsey Ceiling Fan
[ 3 Answers ]
Anyone know of a universal remote that will work with my fan? The original remote has quit working. I dropped water on it
Here is all the information I have on the fan/remote:
Remote Control
Fan speed control
Model UC-7040
120V / 60Hz 1A / 250W
Made in Taiwan
Used with Halsey Ceiling Fan
Ceiling fan remote
[ 2 Answers ]
I have a ceiling fan that is operated by a Litex remote control. It was working fine. I replaced the nine volt battery, but after reconnecting the connections it does not work! The fan will not go on. The display screen on the remote has an image of a battery in the right corner that shows a...
Ceiling fan remote control coverting to light/fan dimmer
[ 2 Answers ]
I am currently remodeling my home and am coming across a major problem that NO ONE seems to have an answer for.
I have two ceiling fans that operate via remote control. The rest of the ones in my home are the popular "pull down" chains - and those work prefectly with the new fan/light dimmers...
View more questions
Search
|