Ask Experts Questions for FREE Help !
Ask
    redneck412000's Avatar
    redneck412000 Posts: 6, Reputation: 3
    New Member
     
    #1

    Sep 4, 2007, 11:08 AM
    Windows cant read anything
    I can't use my printer, cd burner, camera. I'm at my wits end! It tells me that windows can't read from my cd drive. I have a hp pavilion mx50, and windows xp home edition. Can anyone help me?:eek:
    jstrike's Avatar
    jstrike Posts: 418, Reputation: 44
    Full Member
     
    #2

    Sep 4, 2007, 11:28 AM
    You most likely have two different problems here assuming that your CD drive is internal, your CD ROM drive and your USB ports. (printer & camera) Mx50 is your monitor model, not your computer model.

    Have you tried other CD's in the drive?
    Have you checked Device Manager?
    (In the Control Panel select System then the Hardware Tab and then Device Manager)
    Are there any red x's or yellow !'s on there?
    You should also check your BIOS to make sure that the drive is enabled, you can also check your USB ports while you're in there.
    If all that checks out open the case and make sure that the cables are all on tight.
    If that checks out you probably have a bad drive.

    The printer and camera <might> be due to disabled ports or a bad cable but most likely they're due to improperly installed drivers. Have you been able to use either before?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can't load windows, Can't get into safe mode and can't reinstall windows. [ 2 Answers ]

Help! I can't get windows98 SE to load. I can't get into safe mode or reinstall windows. A little history first. I had an issue with my creative sound card. EMM386 not loading along with something that had to do with the sound card. I went back and forth with creative tech support to resolve the...

CD will not read with XP windows [ 1 Answers ]

I used to have windows 2000 on HP and upgraded it to XP windows a year ago. As a result of the upgrade, my CD ROM will not read a disc at all. It did not bother me before but now it bothers me because I have a digital camera and I need to download the software with a CD. The CD icon shows up...

Third party software for windows nt to read fat32 [ 1 Answers ]

Hello, Can you tell me what third party software is used for windows nt to read fat32??


View more questions Search