Ask Experts Questions for FREE Help !
Ask
    moorec999's Avatar
    moorec999 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 3, 2007, 04:29 AM
    Yardman 300 string replacment
    How do I rewind the string on my yardman trimmer? When I do it it won't advance when I bump it?
    Thanks
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Sep 3, 2007, 08:07 AM
    You either have the string wound the wrong direction, or the string has binded from not being kept tight during the rewinding.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Belt replacment Craftsman LT 2000 [ 5 Answers ]

Can anyone tell me how to replace the belt on this lawn tractor

Replacment of geyser element [ 1 Answers ]

When unsrewing the old element it became tandled to such an extent that it is impossible to get it out. What should I do? Can I unscrew the six or seven nuts taking off the plate from the geyser into which the element fits?

Tub replacment [ 1 Answers ]

When you replace a tub in a tiled shower surround with one of these 4 piece tub/shower surrounds what measurements do you have to take off the old tub so you know that you will line up the new tub drain and overflow to the old tub drain and overflow ?:)

New string in string Trimer [ 1 Answers ]

How do I put new string in string Trimer. Bump Type kevant

#-Speed fan switch replacment question [ 1 Answers ]

I'm just replacing a broken 3-way fan switch (in the housing not the wall) which I took out last year. In replacing the switch I have a black, purple, brown and gray. All wires but gray are acounted for. It's the gray I have a question about. There are two gray wires nuted in the housing. Should...

View more questions Search