Ask Experts Questions for FREE Help !
Ask
    jmhhonda's Avatar
    jmhhonda Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 29, 2007, 06:40 AM
    Material on inside of door
    My honda has a carpet like material on the inside of the door it is hanging down and I would like to glue it back up... I used a spray adhesive from a can... but when it is warm out it falls back down. Any suggestion on what kind of glue I should use?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Aug 29, 2007, 06:43 AM
    I'd go get several small sheet metal screws, with larger washer heads, that will pass through the carpet and bite into the panel. Just don't get too deep... there are wiring harnesses behind the panel.
    Good luck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rehanging an inside door [ 3 Answers ]

I am having a problem with my inside doors (closet & bathroom) coming off the door frame. Particularly the top hinge. It starts to pull out from the frame which causes the door to not be able to close (or rub excessively on the frame). How do I go about fixing this? Should I take them down & re...

Removing inside of door refrigerator [ 3 Answers ]

I Need To Remove The Inside Panel Of A Sided-by-side Refrigerator To Work On The Water Valve Of The Indoor Water/ice System. How Do I Remove The Seal (I See No Screws Like There Used To Be)? Is It Glud On And If So How Do I Repace It When Im Finished?

Millikin Door Kit needed in order to install storm door [ 1 Answers ]

Hi. I have a Milliken (may be mis-spelled) exterior door with two side light panels on both sides. I have purchased a Larson Storm Door for the front door. There is not enough depth between the two doors when measuring them - therefore I need to build the front door frame out. I need to know...

View more questions Search