Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant Evolution (carrier infinity) Control and Honeywell Fresh Air Vent.
[ 2 Answers ]
I have an Bryant Evolution system installed. This is the same as a Carrier Infinity system. This consists of a 355MAV furnace, a 598B a/c And SYSTXBBUID01 Evolution control. Also installed in this system is a Honeywell Y8150 ventilator and a Honeywell HE440 steam humidifier. The...
Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems
[ 1 Answers ]
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...
Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D
[ 1 Answers ]
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...
Carrier or Honeywell Zone System?
[ 2 Answers ]
Hey all! I have a 2700sqft home that is two stories half of that is upstairs and half down. I have a 4 year old 5 ton all in one AC/Heat unit and only one return in the house which is downstairs. I have been getting estimates on getting a second return put in upstairs along with a zone system...
Carrier Thermidistat Fan Control Not Working
[ 1 Answers ]
The fan control on my Carrier Thermidistat does not turn the blower fan on when the Fan button is set to On. In Auto, the fan will not operate the fan on either a heating or cooling cycle with my heat pump. The fan DOES work when the furnace operates in emergency mode which is being controlled by... View more questions Search
|