Ask Experts Questions for FREE Help !
Ask
    chance1234's Avatar
    chance1234 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2007, 06:13 PM
    Hampton Bay: Can I remove the Lighting but keep the fan?
    I just moved into a new place and the Hampton Bay fan in one of the rooms works fine, but the lights do not work. Since I do not like the lights, I was hoping that somehow I could take that piece off and keep the fan. Is that possible?

    Thanks so much.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 15, 2007, 07:52 PM
    Yes, remove the 3 screws and disconnect black/blue, and white, make sure insulate ends (wirenut, or unplug).
    You may need the piece that covers the bottom. Usually discarded, when adding light.
    I would think they sell these separately.
    The light may not work, because of a wire is disconnected in the fan canopy, at ceiling.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Aug 21, 2007, 03:06 PM
    If the lights do not work, they can be fixed. However you can remove them. You may need to obtain a cover as Strat says.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay fan removal - can't remove the canopy ring [ 2 Answers ]

I see lots of questions about removing the canopy ring. Most say to turn the ring counterclockwise to remove. When I do that, it only loosens slightly, but won't remove. I've tried twisting, pushing up/down, still it only loosens slightly. Any suggestions?

How do I change the light /remove the globe in hampton bay fan windward II model? [ 10 Answers ]

Hello I have a Hampton Bay - pretty sure it is model #55295 (comes with remote forward/reverse) - the light just went out and I can't figure out how to get the globe off to change the light bulb. I swear we had a professor, an IT guy and another idiot (that's me) who should have collectively been...

Hampton Bay track Lighting [ 13 Answers ]

I have installed Hampton Bay track lighting in five rooms of my house. They are all the low voltage (12 volt) type. In all I have 52 light heads. I had to rewire some of the 90 degree track connectors that came wired wrong from the factory. I am now experiencing the problem that when a bulb...

Hampton Bay Ceiling Fan Lighting Problem [ 3 Answers ]

My ceiling fan is giving off a very dim light. It is a Hampton Bay Brooksdale model. I have tried using various lightbulbs and various watts. When it was first purchased the lighting worked great but then all of the sudden the light just went dim. What and how can I fix this problem of poor...

Hampton Bay Fan Lighting Fixture heating up [ 8 Answers ]

I've installed 4 Hampton Bay fans with attached lighting fixutres and they all work fine except for the last one I installed. The lighting fixture gets really really hot after just a few minutes of operation and I can't figure why. This fan like the others is being installed in place of an...

View more questions Search