
Originally Posted by
somerlass
how do I get rid of a furniture stain on my clothes
http://home.howstuffworks.com/how-to...ish-stains.htm
How to Remove Lacquer and Varnish Stains
By the editors of Consumer Guide
How to Remove Lacquer and Varnish Stains From:Acetate, Fiberglass, Rayon, Silk,
Triacetate, Wool
Scrape (the method of using a dull tool to gently lift off excess solid or caked-on stains) to remove excess. Apply a dry spotter to the stain and cover with an absorbent pad moistened with dry spotter. Let it stand as long as any stain is being removed. Keep the pad and stain moist. Flush (the method of applying stain remover to loosen staining material and residue from stain removers) with a dry-cleaning solvent and allow to dry.
How To Make Wet And Dry Spotters
Dry spotter:
To make a dry spotter, combine 1 part coconut oil (available at pharmacies and health food stores) and 8 parts liquid dry-cleaning solvent. This solution may be stored if the container is tightly capped to prevent evaporation of the solvent. Mineral oil may be substituted for the coconut oil, but is not quite as effective.
Caution: Dry-cleaning solvents are poisonous and may
Be flammable.
Wet spotter:
To prepare a wet spotter, mix 1 part glycerine, 1 part white dishwashing detergent, and 8 parts water. Shake well before each use. Store wet spotter in a plastic squeeze bottle.
How to Remove Lacquer and Varnish Stains From:Acrylic Fabric, Burlap, Cotton, Linen, Modacrylic,
Nylon, Olefin, Polyester, Rope, Spandex
Scrape to remove any excess lacquer immediately. Flush acetone through the stain to an absorbent pad underneath. When no more stain is being removed, change pads and flush well with a dry-cleaning solvent such as Afta Cleaning Fluid. Allow to dry thoroughly.
-------------------------------------------------------------------------
Hope this helps, as you did not mention the type of fabric of your clothes, I searched for what I could.:)
How to Remove Lacquer and Varnish Stains From:Leather, Suede
Carefully scrape to remove excess lacquer. Mix a solution of mild soap in lukewarm water. Swish to create a great volume of suds. Apply only the foam with a sponge. Dry with a clean cloth. If the lacquer has hardened, gently rub it with an emery board or a piece of fine sandpaper. As a thin layer of the hide will also be removed, work slowly and lightly.
-----------------------------------
Some more from the same link as above:)