Ask Experts Questions for FREE Help !
Ask
    USAT's Avatar
    USAT Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2007, 12:13 PM
    AllStyle Coils
    Has anyone used an AllStyle coil with a Goodman system? And, how do they stack up compared to the Aspen and ADP coils?
    I am installing a 95% 120K /5T Furnace and 14 SEER 4 Ton condenser. I was looking for an ARI cert. for the combination, but have been unsuccessful.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 8, 2007, 03:50 PM
    I do not like allstyle coils.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #3

    Aug 8, 2007, 04:14 PM
    Does your local Goodman supplier have this information?
    small job man's Avatar
    small job man Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Feb 22, 2014, 05:57 AM
    What's wrong with allstyle coils? I want a good 4 ton coil to match my 3.5 ton rheem to get 16 seer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frozen coils [ 6 Answers ]

The roof top unit condenser coils are all frozen and covered in ice, what could be the reason for that?

Frozen coils, not cooling enough [ 4 Answers ]

Hello, I have a GE - Hotpoint Side-by-side refrigerator that has frozen coils on the freezer side and not cooling enough on the fridge side. What do you think it could be. Thank you for your help. MJ

Water on A/C coils and pipes [ 4 Answers ]

A few days ago I found water in the floor next to the A/C unit. When I opened the door and checked the A/C I found water drops on the coils and the pipes, they were dripping into the rim around the A/C. I thought the drain was stopped up but there is too much water dripping and I don't remember it...

New A/C coils in old case? [ 1 Answers ]

I am replacing two 21 year old Carrier AC units with new Carrier 10 seer units, coils and lines. My installer said that he will use the old cases ( as they are better constructed than the new cases) to house the coils. Is this an OK thing to do? Are there any size concerns to address with doing...

View more questions Search