Ask Experts Questions for FREE Help !
Ask
    bubba42345's Avatar
    bubba42345 Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2007, 11:07 AM
    Compression Fitting Assistance
    Tom,

    Exactly how does the hose from the washing machine fit in to the compression fitting? I bought a compression fitting today but when I put the hose from the washing machine in to it, it's not tight. The supply house gave me 3 different rubber washers but none are tight. Am I doing something worng or do I need a tighter washer.

    Scott
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 7, 2007, 11:29 AM
    Hi Scott,
    You need a gasket that fits snug on the hose. The nut will then compress the gasket over the hose as it's tightened. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tips on copper compression fitting? [ 11 Answers ]

My problem is whenever I work with coppoer compression fittings, I never seem to get a good seal and something always leaks. Are there any tips on how to do it right? Should I use a hack saw verse my Reciprocating Saw to cut the tube? (SLow vs Fast). I know the cut has to be straight, then...

Stand Pipe Compression Fitting [ 5 Answers ]

Where can I buy a stand pipe compression fitting like the one in the pic? Thanks Scott

Compression fitting on soft cooper pipe [ 5 Answers ]

Is it possible to install a 3/4" valve with compression fitting on soft cooper tubing 3/4" as well? Will it fit? Will it hold? Tank you

Another name for fitting? [ 2 Answers ]

I will soon be taking the state exam to get my license. On the material list is a "90 degree twin elbow". Am I missing something? I don't know what fitting they are talking about. A little help would be much appreciated. Any ideas?

View more questions Search