Ask Experts Questions for FREE Help !
Ask
    elnenelindo19's Avatar
    elnenelindo19 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 6, 2007, 12:53 PM
    1.5 harness need to run what wires for 1.6 motor
    I'm having probs because I had the d15 motor on my honda civic and now I got a d16a6 motor but I don't havethe harness to be able to run the mpfi I have the dizzy but I don't know what wires to run to activate this with the stock 1.5 harness please help... thanx
    stilllearning's Avatar
    stilllearning Posts: 56, Reputation: 4
    Junior Member
     
    #2

    Aug 6, 2007, 11:15 PM
    Its been years since I've done a a6 swap. You will need an Si ECU. The D15b ECU will not work. Try this site

    DPFI to MPFI writeup - Hondaswap

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement condenser fan motor wires are too short - now what? [ 2 Answers ]

The wires are about 10 inches too short. In normal wiring one would make a junction box and wire up extensions, but there is no place for a junction box inside the unit, of course. The original fan motor also used a flexible metal conduit, although the new fan wires appear to be overinsulated for...

90 honda accord brake makes motor run ruff [ 4 Answers ]

I have a 1990 honda accord with a 2.2 motor with a auto trans. The car starts fine, but when I put my foot on the brake the tech jumps all over the place and the motor starts to run ruff... help please Thanks

3 wires + 2 wires  POOL MOTOR [ 2 Answers ]

I need help connecting a motor for my pool. The motor has 3 wires coming out of it. 1 white, 1 black, 1 black with a white stripe. A continuity test on the 2 blacks says they are wired together somewhere. I have a power cable coming out of the ground. 1 white + 1 black cables inside. ...

Honda Civic 95 run motor on stand [ 3 Answers ]

Hello I Have a running 95 Honda civic that was hit. I am trying to take the motor out and make it run out of the car. I unplugged the computer and moved it to the engine compartment and tried to do the same with the wiring on the driver side. What wires are absolutely necessary to make the...

Wireing harness [ 1 Answers ]

My in laws have a 1993 Ford Explorer Sport 4x4, 4.0 L V6 engine. They were told the wireing harness going to the engine (I am assuming the harness to the computer) is defective and there is no longer an after market replacement harness being made. Is it possible this is true? It seems a shame to...


View more questions Search