Ask Experts Questions for FREE Help !
Ask
    b kelly's Avatar
    b kelly Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2007, 11:22 AM
    Kenmore gas dryer model 110
    I have a kenmore gas dryer approx 3 yrs old recently it quit working runs but does not heat I changed celonoid also thermostet/flame sensor help parts I used were from older model that I replaced in past
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 6, 2007, 02:12 PM
    Did you check the parts you put it to verify they were good? Do you have flame? Gas dryers ar very senitive to having a clean vent to dry properly. Check lint trap and vent hose from unit al the way out to where it exits house. Many times birds etc will clutter up the hose where it exits house.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer Model 110.86873100 [ 1 Answers ]

Where is the heating element located on a Kenmore Dryer, Model #110.86873100?:)

Kenmore Dryer model 110.96272100 [ 5 Answers ]

Please help: My Kenmore dryer has been shutting itself off after a few minutes; before completing its cycle, it will restart when pushing the start button. But will shut off again after a few more minutes.

Kenmore 29" gas dryer Model #110.72602101 takes several cycles to dry. [ 6 Answers ]

My 5 year old Kenmore Super Capacity gas dryer (model #110.72602101) suddenly started taking several cycles to dry a load of clothes. I checked the vent and it is not clogged. There is a plug on the front of the dryer I pulled off and watched the flame ignite and it stayed burning until the timer...

Kenmore Dryer - Model 110.96281100 [ 1 Answers ]

I have a Kenmore dryer - model 110.96281100 which stops mid-cycle or won't start at all. Removing the timing unit revealed a bit of black dirt which I cleaned. It worked fine for about 2-3 days but then went back to same old status - sometimes starting, sometimes not. I'm trying to figure out if...

View more questions Search