Ask Experts Questions for FREE Help !
Ask
    annieboo's Avatar
    annieboo Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 20, 2007, 05:01 PM
    Install molding over window frame into sheetrock
    What is the best way to install trim molding around a window frame on the drywall or sheetrock. Should I use finishing nails and should I also glue the trim too?
    glavine's Avatar
    glavine Posts: 895, Reputation: 87
    Senior Member
     
    #2

    Jul 20, 2007, 05:36 PM
    You Can Use Finish Nails , Hand Drive Nails Or Gun Nails, As For The Size Of Nail, A 4 Penny Finish For The Inside Edge Will Be Fine And A 8 Penny For The Outside Edge Will Work, No Need For Glue Except For The 45 Degree Joints Of The Trim Your Using
    Knot Hole's Avatar
    Knot Hole Posts: 13, Reputation: 3
    New Member
     
    #3

    Aug 2, 2007, 07:24 PM
    Quote Originally Posted by annieboo
    What is the best way to install trim molding around a window frame on the drywall or sheetrock. Should I use finishing nails and should I also glue the trim too?
    finish nails usually suffice... the window is set into a framed opening (2x4's).. the sheetrock is face nailed to the studs... depending on the width of the trim moulding striking the stud is usually no problem... locate the studs/layout the moulding nailing... gluing the miter corners is sometimes advised... especially if it is paint grade trim... it helps to side nail the miter... generally keep your face nailing in 2" from the boards end otherwise the moulding may split... if it is hardwwod trim you may have to predrill for the nails... set the heads with a nail punch

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Crown molding [ 16 Answers ]

I need help installing crown molding. Is it necessary to use adhesive as well as nails?

How to close all the childwindows(popup window) when closing the parent window [ 3 Answers ]

Hi, all In javascript I need to close all the child windows that I have opened through a parent window Scenario: Here I will be having as many as child window opened and name given to the child window can not be tracked because each will be having a different name, and I am using 70 to...

Crown molding [ 3 Answers ]

Question 1 What type of nails do I use for the real wood crown molding? Question 2 How do I measure the angle, in degrees, of my ceiling? It is something other than 90 or 45? I was hoping to use something simpler than Trig functions.

Re-route vent below window to install sliding glass door [ 1 Answers ]

I want to install a sliding glass door off the back of my house. It would be best to put it where I currently have a window. Only one problem, there is a vent centered directly below the window. Correct me if I am wrong, I have two options 1.) Move the vent off to the side of the sliding...


View more questions Search