 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
A/C Seems to have power, no cooling, thermo weird
I have an Amana heating and airconditioning whole house unit. The unit is 3 years old. THe A/C has been running fine all summer. I came home today, after a poweroutage, and ther LCD thermostat has all of the characters lit. All of the time, temp, and incidators are all lit up. If I turn the swith for the fan to "ON" the fan does start and run. If I turn the switch for "Heat, OFF, Ccool" to cool, nothing happens. I have turned off the breaker and turned it back on, but nothing changes. What to do?
|
||||
|
||||
|
You may have no power to the thermostat even though it is lit up, you may be operating on batteries in the stat. Check to see if you may have popped a breaker or fuse .Is this a package system (all in one unit) or do you have a separate furnace? THere are fuses near the A/C unit in a box usually mounted on the wall or side of the unit.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...
What is the basic functionality of these equipment ? What is differnce between PDU & RPP.
OK I just recently bought a honeywell thermostat controller. When I removed my old thermo (slider switch type with mercury) only 2 wires were connected, but a third wire was in my box still covered (not bare wire). One wire connected was white and the other red the 3rd odd ball was green. What...
My LUX thermostat and wiring has a red wire and a white wire. My HEIL furnace is labeled R G W Y G. Does the red go to R & white to W? I'm not sure and don't want to cause any damage! Thanks for any help!
I changed the thermostat from an old Honeywell to a programmable Honeywell 5-2. I have central air & heating is an electric water heater. I programmed it and thought all was well. I came in today and it was 86 degrees. The fan is working but not the air. I set air at 72 and the screen says cool...
View more questions Search
|
