Ask Experts Questions for FREE Help !
Ask
    Albix714's Avatar
    Albix714 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 27, 2005, 03:02 PM
    Fixing low water pressure
    Hi, I have a 3 story home with a shower on the 2nd floor and one on the 3rd floor. I also have low water pressure that gives me some pretty weak showers. Is there a way to increase my pressure? I should say that this situaution is not unique to my neighborhood. Thanks.
    branco74's Avatar
    branco74 Posts: 1, Reputation: 1
    New Member
     
    #2

    Jan 27, 2005, 04:16 PM
    Install an electric booster pump to increase water pessure
    Albix714's Avatar
    Albix714 Posts: 4, Reputation: 1
    New Member
     
    #3

    Jan 27, 2005, 04:18 PM
    Thank you.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #4

    Jan 28, 2005, 12:07 PM
    A booster pump will work better with a pressure tank, see https://www.askmehelpdesk.com/showthread.php?t=7403
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #5

    Jan 28, 2005, 04:02 PM
    Low Pressure
    What is the PSI entering your house?
    vaa's Avatar
    vaa Posts: 1, Reputation: 1
    New Member
     
    #6

    Mar 21, 2005, 12:12 PM
    Clueless
    :confused: I feel relief to have found this site because I REALLY need HELP. I own a small bungalow in the city of chicago. I have very low water pressure in my house. You basically have to decide what is a priority when it comes to water in my house because you can only do one thing at a time, dishes or laundry. Lets put it this way, a DO NOT OPEN sign goes on the kitchen sink when anybody takes a shower. I want to know what are the necessary steps to checking the pressure at my house and how do I do it. I don't want to have any expenses that I can avoid or waste my time by not taking the necessary steps. I have had several people check my home and they claim the problem is outside with the city. The city has come out here and dug up my front lawn about 3 times and they claim that the problem is inside the house. WHAT CAN I DO. How can I tell who is right or wrong? I want to do the checking for myself if I can. PLEASE HELP!!
    dgordon1979's Avatar
    dgordon1979 Posts: 2, Reputation: 1
    New Member
     
    #7

    Sep 12, 2005, 11:43 AM
    Shower pressure
    I found a great website for discount shower heads, but it also has a great support section with step by step pictures and instructions for increasing water pressure.

    www.showerstore.com
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #8

    Nov 7, 2005, 12:31 PM
    Quote Originally Posted by vaa
    :confused: I feel relief to have found this site because I REALLY need HELP. I own a small bungalow in the city of chicago. I have very low water pressure in my house. You basically have to decide what is a priority when it comes to water in my house because you can only do one thing at a time, dishes or laundry. Lets put it this way, a DO NOT OPEN sign goes on the kitchen sink when anybody takes a shower. I want to know what are the necessary steps to checking the pressure at my house and how do I do it. I don't want to have any expenses that I can avoid or waste my time by not taking the necessary steps. I have had several people check my home and they claim the problem is outside with the city. The city has come out here and dug up my front lawn about 3 times and they claim that the problem is inside the house. WHAT CAN I DO. How can I tell who is right or wrong? I want to do the checking for myself if I can. PLEASE HELP!!!

    It isn't pressure as much as it's volume and this tells me so, " Lets put it this way, a DO NOT OPEN sign goes on the kitchen sink when anybody takes a shower." You can't have pressure when you run out of water and that's exactly what you're doing. How old is your house and what kind of water pipes do you have? Copper? Plastic? Galvanized? If the city has checked the pressure to your house and found it adequate , they certainly have the volume to back it up. It's time to bite the bullet and call in a plumber. Don't be too surprised if he recommends a repipe job. Sorry I couldn't be more up beat. Tom
    kendravixie's Avatar
    kendravixie Posts: 6, Reputation: 1
    New Member
     
    #9

    Dec 20, 2005, 08:57 AM
    Help for Apartments?
    I'm living in a 3 story apartment, energy efficient with water heater and heater in utility closet.

    I have asked my maintenance to look at my pressure, I have a little more than a trickle, takes a very long time to shower.

    They've done nothing.

    Is there any options that I can do in an apartment??
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #10

    Dec 20, 2005, 03:18 PM
    There isn't much we can do until we find out what material your pipes are made of and at what pressure enters your house. Keep on your apartment manager to look into this. As a renter you're guaranteed a roof that doesn't leal, a toilet that flushed without flooding the house and water that is both drinkable and plentiful. If you are interested in applying pressure on management I know a few city departments that you could file a formal complaint with. Regards, Tom
    kendravixie's Avatar
    kendravixie Posts: 6, Reputation: 1
    New Member
     
    #11

    Dec 30, 2005, 01:15 PM
    I don't know. I'm a rentor in an apartment built in the 80's, with no support whatsoever from the office, and no phonecalls on average returned. I complained the first time I moved in, about the pressure and they took my original shower head and left, with no work being performed!

    But I did get a Cascadia Waterpik showerhead, and need help with how to remove the flow control...
    Doesn't seem to be in the instructions how, just a little diagram of where it is... not what or how to remove it, or what kind of tools necessary to help you remove this annoying bit of plastic.

    Any suggestions?:confused:
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #12

    Jan 3, 2006, 04:05 PM
    "Doesn't seem to be in the instructions how, just a little diagram of where it is... not what or how to remove it, or what kind of tools necessary to help you remove this annoying bit of plastic."

    If you know where the water saver is then just pry it out and toss it. Regards, Tom
    kendravixie's Avatar
    kendravixie Posts: 6, Reputation: 1
    New Member
     
    #13

    Jan 3, 2006, 04:39 PM
    Seems a little bit more complicated, and was.

    To pry out the flow control of a Waterpik Cascadia shower head:
    1. Start at the flexible arm, near the "nut" where it would screw into the shower lead.

    2. Take a pair of needle nose plyers, or your leatherman/winchester and unscrew the "filter", making sure to bring the washer out with it.

    3. Take the tip of your needle nose plyers, (this is a delicate edge) and take the inner edge nearest the Oring that faces outwards, and pull. May take a couple of attempts to pull it, do NOT turn the flow control to the side, as it may become lodged.

    4. Replace the "filter", making sure that washer is under the edge and does not easily slip out.

    Voilą. No flow control. I can now shower in ample water without having to spend more time trying to rinse clean!

    Waterpik Cascadia Shower head, I give it a 5 out of 5 stars, best shower head I've ever had. Two settings, rainfall and power spray, easy change between the two. And no, I don't miss that 2" section from it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water tank height versus water pressure [ 3 Answers ]

I'm not a physicist so I need your help. I live in Mexico. We have a water tank sitting on the roof - there is no pressure pump. The water pressure in the house is very low. Is there a rule of thumb (for the common man) that will tell me how how much pressure increase will result from raising...

Increase Hot Water Pressure w/Water pump? [ 3 Answers ]

Would a Watts Premier Hot Water Recirculation Pump (http://www.costco.com/Browse/Product.aspx?prodid=11026121&whse=BC&topnav=&cat=&s=1) (or any other brand name) help to increase hot water pressure if you install it directly to the hot water output pipe and then turn it on ONLY while taking a...

Fixing Low water pressure [ 4 Answers ]

Hi, I own a 2 story home and have always had problems with my water pressure. All my neighbors do as well. When I first turn the shower or faucet on the water come sout with a little more pressure but then dwindles to a trickle. I have copper piping and have had all the piping checked by a...

Water pressure/water softener? [ 1 Answers ]

I have a "waterfall" faucet in my tub (separate shower). I turned on the water to the tub the other day and it barely runs. Then tonight my daughter was running the tub faucet and I had no hot water pressure to the kitchen. This has never been a problem. I understand from reading that we may...

Low water pressure in an area known for high pressure [ 3 Answers ]

Greetings, My wife and I are in the process of updating 1957 side by side split level. The previous owner (OK, my Mom as I bought the house I grew up in from her) said that when they moved in they had to install a pressure reducer into the line. I have searched high and low but, I can't see...


View more questions Search