Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Looking for PVC Coupler (that slides inside a PVC)
[ 1 Answers ]
My brother teaches Science at his Elementary School, and for the past month I've been helping my brother make Water Bottle Rockets. The problem we are having is the lost of pressure from the launch tube. Like to maintain 125 PSI for 24 hours. We tried the rubber stopper which works well, but...
Connecting pvc to pvc with no hub fitting
[ 8 Answers ]
My plumber ran into a dilemma when installing rough plumbing for a new basement bathroom. After already laying the pvc piping in place under the broken up concrete floor we found the pvc to cast iron Tee connections leaking. This was discovered after I had filled the opening with a base of gravel...
Leaking PVC
[ 1 Answers ]
I need some reassurance. I live in a two year old home with two bathrooms upstairs. When the water is drained from the tubs, I can hear the water rushing down the pipe, but I also hear a dripping sound at the same time. I look in the basement where the pipes are exposed, but I don't see any...
Painting pvc
[ 5 Answers ]
Problems painting pvc pipe
Copper to PVC
[ 2 Answers ]
My house has all copper pipes. However, I noticed that from the street main before the house there is a tee that connects copper to PVC. The PVC branch is connected to my sprinklers and nothing else. I am worried that the PVC wasn't meant to be under constant water pressure from the main and... View more questions Search
|