 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Flange bolts
I recently tiled my bathroom and want to install a pvc flange adapter onto the top of the waste pipe. The waste pipe already has existing bolts that will be too short when I install the new flange. How do I remove the old bolts being that they are install with the head down through the slots with the threads up? :o
|
||||
|
||||
|
The Bolts Will Slide In The Notchs And Can Be Pull Strait Up At Those Points. They May Have A Nut At The Bottom Of The Threads That May Keep Them Tight Where They Are, Losing Them And Slide The Bolts To Where The Slot Opens Up And Then Just Pull Them Out, Put The New Ones In The Same Way
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can the alternator cover nuts/bolts break via oxidation? The technician said they were frozen due to oxidation?
I am trying to fix my toilet and need to remove the tank. Unfortunately the bolts are rusted and stripped so I can't remove the nuts/bolts. What should I do?
I have a mid-80's Crane toilet. I can not get it to stop leaking from the two mounting bolts. I've tried replacing the washers & bolts, cleaning the porcelein with scouring pad, and even using plumbers putty. Nothing works! I've tried tightening and loosening the bolts. I'm at my wits end and...
Good evening! I am trying to remove the bolts that hold the stems of the hot and cold water faucets on the tub. I'm using a cresent wrench and it's almost rounding the edges of the bolt. I've sprayed WD-40 in between the bolt and water pipes but they haven't budged yet... I'm trying to get the...
View more questions Search
|
