Ask Experts Questions for FREE Help !
Ask
    LarryMc's Avatar
    LarryMc Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 27, 2007, 06:43 AM
    Termite damage in beam supporting floor joists
    Termites got into the end of a beam supporting the floor joists in a crawl space under the first floor. I think I can use floor jacks and termporary beams on either side of the damaged beam to support the floor, then cut our the damaged beam. It is about 8 ft from the concrete foundation wall to the first steel post supporting the beam (the termite damage is only in the first 2 - 3 ft from the foundation). The beam is double thickness (2 x 10 I think). Should I cut the beam so that the two 2 x 10's are staggered (how much stagger?) with the stagger right over the steel post? The replace and bolt (and glue?) through the stagger between the new and old beams.

    Thanks
    Kstar4u's Avatar
    Kstar4u Posts: 255, Reputation: 22
    Full Member
     
    #2

    Jul 27, 2007, 02:19 PM
    First things first... if you've discovered termite damage at all... the most important thing to address before you make repairs is the infestation. You certainly don't want to "feed" those critters with some fresh "food" that will enable their colony to grow and cause additional damage. I'm assuming that the type of termites that you are dealing with are "subterranean" termites. Have you contacted any professional termite control folks?

    Chances are good that if you have termites present in one location... they may be found elsewhere in your structure. Once you can be reasonably confident that they are gone, or have a chemical barrier in place to prevent further activity... then the repair(s) should be done.

    As far as your repair questions are concerned... I would recommend at least 4 feet of overlap (staggering) of the floor joists/floor support beams and using two 1/2" or 5/8" bolts and washers every 16" to laminate the two 2X boards.

    Good luck (I always try to over-build at the foundation level)
    LarryMc's Avatar
    LarryMc Posts: 3, Reputation: 1
    New Member
     
    #3

    Jul 27, 2007, 02:29 PM
    Thanks, yes I didn't mention that the termites were baited and they took enough bait back to the nest that they should be destroyed. In New England they do not appear to set up barriers anymore - they surround the house with traps and when termites are found they are baited. I am pretty confident they are gone - it is a necessary problem if you want to live in the forest.

    Thanks for the rec. I probably would have only overlapped them about 2 ft - 4 ft makes sense.

    Larry

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to know how to Replace a termite damaged beam in basement. [ 2 Answers ]

Need to know how to remove a damaged termite damaged beam in basement wall stud.

Holes in floor joists [ 4 Answers ]

Hi, We are adding a new addition to our current home. The plumber is putting in the plumbing and he has hacked away about 4 inches from our new floor joices. We are now concerned about the structure and the integrity of that. Its for a new bathroom with a toilet and a biddet and all floor tile....

Proper underlayment for vinyl floor starting at floor joists [ 2 Answers ]

What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction...

How big of a beam should I use for a supporting wall? [ 1 Answers ]

Dear Ask Me Help Desk, I am renovating my kitchen (see related threads on water flow and gas lines in plumbing) and need help on calculating the size of a beam for a supporting wall. I live in L-Shaped 2900 square feet 1963-built rancher in Atlanta, GA. The kitchen is on one side of a long run at...


View more questions Search