Ask Experts Questions for FREE Help !
Ask
    Yeshua360's Avatar
    Yeshua360 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 26, 2007, 05:40 PM
    Kenmore washer
    We have a Kenmore washer that is about 3 y/o and now will wash BUT then half way into rinse cycle it stops and the letters, "FL" flash and nothing we have tried will make the machine resume or do any other task.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 26, 2007, 06:24 PM
    FL may mean FLood level(or over fill), found someone with same problem: Kenmore Elite Washer Over Fill Switch? [Archive] - DIYbanter
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Jul 27, 2007, 03:49 AM
    The things that cause overfill are the water valve or the pressure switch. Many times you can blow through the hose on pressure switch and all is fine. If both are good it may just be false signal or bad faulty board
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer [ 3 Answers ]

I have a Kenmore Washer that is about 15 years old. It filled up with water and now will not drain. Is it toast? Linda

Kenmore washer [ 1 Answers ]

I can't get the main control knob off to get the timer changed

Kenmore washer dryer combo 110-92966-102,washer agitates for a little then it stops. [ 0 Answers ]

Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...

View more questions Search