Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How many outlets/lights/rooms/other on one circuit?
[ 8 Answers ]
I have a house built in the 1890s with the original knob and tubing wiring. I'm completely remodeling the bathroom and I want to rewire 3 bedrooms. At first, my plan was to use one circuit per room, but I'm not going to have enough circuits in the existing panel for that. So my question is,...
20amp circuit breaker, 15 amp receptacles
[ 2 Answers ]
I have a 20amp circuit breaker with 15 amp receptacles and light switches on #12 wire with a load of 1700, is this allowable? If not, and I change to a 15 amp circuit breaker, is the 1440 watt safety load in the code or is it a non-code safety suggestion?
Shared neutral GFI receptacles Fluorescent lamps and lights
[ 1 Answers ]
Recently installed a 20 amp shared neutral circuit. One leg was 6 GFI receptacles, the other 8 lampholders with 13 amp Fluorescent lamps. Another 20 amp circuit had 5 4 foot (2) lamp cold weather fluorescent fixtures. Q1 Any code violations? Q2 Do they make a double GFI CB with a shared...
How many lights on a 15A lighting circuit
[ 3 Answers ]
Hi everyone! First post and thanks in advance, hopefully! I was wondering how many lights I can put on a 15A lighting circuit. I have a second floor that I want to put a (1) hall light, (3) closet lights, & (1) bedroom light. Would it be too much to put a bathroom vanity light and a vent...
Lights out but circuit is hot
[ 1 Answers ]
Here is the situation, 2 wall outlets, 1 fluorescent, and 9 celing cans all on the same circuit. 6 of the cans are controlled by a pair of 3 way switches, the other three on single pole switches. Nothing works. The circuit breaker doesn't trip and I have reset it several times. What happens is... View more questions Search
|