Ask Experts Questions for FREE Help !
Ask
    paulschneider's Avatar
    paulschneider Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 22, 2007, 08:59 AM
    Hampton Bay remote ceiling fan
    I am trying to get at the receiver in the upper dome. How do I get at that thing?
    Do I need to take down the whole unit? Is there and easy step to reset the receiver?
    Please help!! :confused:
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 22, 2007, 06:34 PM
    Turn Power off, for a minute. If removing receiver, turn off power.
    Remove the screws with holes, then loosen the others, so you can twist and remove. Hang on hook. Remove wirenuts. Carefully slide receiver out with a Large Hammer. I'm sorry, that's for installation. Don't use hammer no matter how good an idea it seems. Everything has to be just in the right place.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jul 23, 2007, 05:11 PM
    Strat has a good idea (except the hammer) although you may need to remove the fan regardless, depending on how the receiver was mounted.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan remote [ 26 Answers ]

We have missplaced our remote for ceiling fan. Fan will not work. Have another remote for other fan but will not work on this fan. Can I secure a remote that will work fan? Please help Hot in bed

Hampton Bay Ceiling Fan Remote [ 5 Answers ]

I have two Hampton Bay Ceiling Fans in my office that works off the remote the problem is the remote will work one fan just fine but it doesn't work the other fan at all please help

Hampton Bay Remote Ceiling Fan [ 1 Answers ]

Hi! We have a Hampton Bay ceiling fan in our bedroom that is run strictly by remote (no pull chains). It usually works fine and we haven't had too many problems, but occasionally we can get it to turn on, but not off. All of a sudden it (the remote? The receiver?) will stop working when the...

Hampton bay remote ceiling fan [ 1 Answers ]

The light on my ceiling fan does not work. I changed the bulb. I also changed the batteries on the remote control to no avail.

Hampton Bay Ceiling Fan Remote [ 3 Answers ]

I installed a Hunter ceiling fan with a Hampton Bay remote. The remote controls the fan correctly. The light works when pulling the chain but does not work from the remote. I wired the blue wire from the remote to the black/white striped wire from the fan. Any suggestions?

View more questions Search