Ask Experts Questions for FREE Help !
Ask
    ss7015's Avatar
    ss7015 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 22, 2007, 08:01 PM
    Ceiling fan/lights work fan won't
    We have had a ceiling fan in out family room for years. One day the fan just stopped working but the lights continued to work. We assumed the motor on the fan burned out. My husband recently put in a new Hampton Fan and when we tested it the lights worked, but the fan turned for a second then stopped. I was hoping someone would know why this would happen? Thanks for the help.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jul 23, 2007, 04:20 PM
    With no testers, you could hook up fan wire at ceiling to light wire. If light still works, fan has power, try pull chains and switch. Cap disconnected fan wire while testing, keep loose wire safe. At that point. If it still doesn't work, Remove switch housing look for disconnected wire at fan speed and direction switch, or Capacitor.
    Then test those parts or replace fan. It still may be no power to fan wire, and fan OK.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #3

    Jul 23, 2007, 05:06 PM
    First of all, what make/model was the old fan? Picture will suffice if you do not know.

    How was it controlled? How is the new fan controlled?

    Do you have a volt meter or tester?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hamilton Bay Ceiling fan: fan works, lights do not [ 2 Answers ]

Fan has two pull chains (fan & lights) and a toggle switch along bottom circumference. Fan works but lights do not, regardless of pull chain and toggle switch positions. Everything used to work (2-3 tears old). Light bulb is good.

Ceiling fan works, only 1 of 3 lights work [ 6 Answers ]

I just installed the Harbor Breeze Vector Elite, which is a pullchain fan. I installed a Harbor Breeze remote to it as well. The fan controls work fine, but only one of the lights is working. It will dim and everything, but the other 2 won't come on. What up?

Installed Ceiling Fan: Fan Works/Lights Quit Working [ 3 Answers ]

I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...

Lights do not work on the ceiling fan [ 3 Answers ]

The fan will come on when using the fan switch, but when I use the light switch the lights will not come on. Is this a wiring problem or a switch problem? I would like to fix it myself if possible. The ceiling fan was put in with lights attached below in 1995 and the lights quit working about 2...


View more questions Search