Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pulling up a couple Peel and Stick Vinyl Tiles
[ 13 Answers ]
I laid peel and stick down in the foyer a few years ago and everything is in tip-top shape, good as new, except that I managed to damage 4 of them this morning when I was moving some stuff. How can I go about bringing up just those 4 tiles without damaging the stuff already there? I've got...
Peel and stick vinyl tiles
[ 4 Answers ]
Looking to use these in my kitchen because I can't get the same pattern on a roll of vinyl.Now I have never used these before and have a couple questions.I know they come with glue on the backs but how good is it.Does it hold for a short time but then they come loose.See wondering if I should add...
Stick-down tile adhesive removal
[ 2 Answers ]
I have an apartment where I put down vinyl composition tiles (1/8" VCT). The tenant covered about 125 square feet of it with stick-down tile. It's a lot of work, but the stick-down tiles can be removed one-by-one with a heat gun. The problem is, how do I remove the adhesive that remains on the...
Peel and stick tile
[ 4 Answers ]
How can I keep my peel and stick tile from popping up? I've tried sticking more glue on the back of the tile, but that does not work. It is being put on 1/4 plywood subfloor.
Peel and stick
[ 1 Answers ]
I would like to put peel and stick on an already tiled floor. The tiling was well done so I don't want to tear it up. It's just ugly for my taste. How can I pull this off? View more questions Search
|