Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hamilton Bay Ceiling fan: fan works, lights do not
[ 2 Answers ]
Fan has two pull chains (fan & lights) and a toggle switch along bottom circumference. Fan works but lights do not, regardless of pull chain and toggle switch positions. Everything used to work (2-3 tears old). Light bulb is good.
Ceiling fan works, only 1 of 3 lights work
[ 6 Answers ]
I just installed the Harbor Breeze Vector Elite, which is a pullchain fan. I installed a Harbor Breeze remote to it as well. The fan controls work fine, but only one of the lights is working. It will dim and everything, but the other 2 won't come on. What up?
Installed Ceiling Fan: Fan Works/Lights Quit Working
[ 3 Answers ]
I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...
Lights do not work on the ceiling fan
[ 3 Answers ]
The fan will come on when using the fan switch, but when I use the light switch the lights will not come on. Is this a wiring problem or a switch problem? I would like to fix it myself if possible. The ceiling fan was put in with lights attached below in 1995 and the lights quit working about 2... View more questions Search
|